VT70LP For NEC Projector Lamp VT37 VT47 VT570 VT575
Product Parameter
| Part Numbers | VT70LP |
| Fittable projector models | For NEC Projector Lamp VT37 VT47 VT570 VT575 |
| Bulb Type | 130 W |
| Life time | 3000 -5000(Hours) |
| Packing | Carton box with foam |
| Minimum Order quantity | 10 piece |
Adjust the screen position
Use the remote control or built-in buttons to navigate to the appropriate settings and make adjustments until the image fits within your desired screen or wall area
Product Information
The NEC VT70LP replacement lamps are compatiable with VT37 VT47 VT570 projectors.The working hour time is:3000-5000 hours,After repalcing our new lamps,the projector performance can be the same of the new original one and improve the effect of projection,and make you feel comfortable while using.
Bulb warranty
Remove the Old Lamp: Carefully detach the old lamp by following the instructions provided in the user manual. In some cases, the lamp may be held in place by screws or clips. Gently release the lamp and disconnect any cables or connectors attached to it.
Install the New Lamp: Take the new lamp and align it correctly with the lamp housing. Make sure it fits securely and matches the connections of the previous lamp. Reconnect any cables or connectors that were disconnected during the removal process.
Secure the Lamp Compartment: Once the new lamp is in place, secure the lamp compartment by reattaching any screws or latches that were removed earlier. Ensure that the compartment is sealed properly to prevent any dust or debris from entering.
Reset Lamp Timer: After installing the new lamp, it is essential to reset the lamp timer on the projector. This step varies by projector model, so refer to the user manual for instructions on how to reset the lamp timer.
Product Tags:
|
|
NEC Projector VT70LP VT37 VT47 VT570 VT575 Lamp 130W Images
|
